Clear PVC plastic mold with 3 cavities.
This shape of soap is a step up in style compared to the standard rectangle design. The clean lines of the beveled edge on top give it an added element of class and elegance. It is smooth on the bottom and can be used to make melt and pour soap, cold process soap and lotion bars.
Finished Soap Size
Each cavity makes a bar of soap that measures 3.375 inches long by 2.33 inches wide by 1 inch in depth and holds 4 ounces.
This mold can tolerate temperatures of 135 to 140 degrees F. Warping may occur if pouring soap in above these temperatures. Soap is easiest to release 12 to 24 hours after cooling.
Measurements and weights listed above are approximate. These molds are not food grade. Wash molds in warm, soapy water. Avoid putting in the dishwasher as this may cause the molds to become brittle and/or warp.