Clear PVC plastic mold with 6 cavities.
Our basic round soap mold is smooth on the top and bottom. It works wonderfully to make soaps that contain added ingredients such as dried lavender or ground pumice. The clean lines of the basic shape allow for these types of therapeutic additives to be highlighted in the soap. It also works well to highlight soaps where you have used a special technique such as making a multi-color layered soap.
Finished Soap Size
Each cavity makes a bar of soap that measures 2.375 inches in diameter by 1 inch in depth and holds 2.5 ounces of soap.
This mold can tolerate temperatures of 135 to 140 degrees F. Warping may occur if pouring soap in above these temperatures. Soap is easiest to release 12 to 24 hours after cooling.
Measurements and weights listed above are approximate. These molds are not food grade. Wash molds in warm, soapy water. Avoid putting in the dishwasher as this may cause the molds to become brittle and/or warp.